AutoMeter 1720 Gauge Set – 3-3/8 QUAD SPEEDO

$1,050.32

2 PC. GAUGE KIT 3-3/8" QUAD & TACH/SPEEDO 240-33 Ohm OLD TYME BLACK

1 in stock

SKU: AUM-1720 Category: Brand:

Description

Sometimes space is limited. The AutoMeter Quad Gauge provides a solution to limited dashboard space while providing a clean look. Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications. Includes a single wire 1/8” NPT temperature sender and a 1/8” NPT oil pressure sender. The voltmeter reads from 8-18v on negative ground electrical systems and fuel level resistance range is 240 ohms empty to 33 ohms full (compatible with AutoMeter’s 3262 fuel level sender).

Features

  • Highly polished chrome bezel
  • Speedometer features lit LCD odometer – capable of registering one-million miles with two resettable trip odometers
  • 4 in 1 gauge design saves valuable real estate on your dash while allowing you to monitor critical parameters
  • Traditional incandescent lighting illuminates around the perimeter of the dial
  • Kit includes fuel level sender (240E/33F) oil pressure sender water temperature sender 2-wire hall-effect speed sender that is compatible with GM/Chrysler applications (7/8" – 18THD)
  • Sending unit adapters (1/4" 3/8” and 1/2" NPT adapters) bulb and socket assemblies red and green bulb covers mounting hardware and detailed instructions for installation.
  • AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
  • 12 and 16 volt compatible compatible with nearly every street car or race car electrical system
  • Speedometer has a simple push button 2 mile drive calibration. No dip switches and can be reprogramed at any time to accommodate changes in gear ratio or wheel and tire combination.
  • Tachometer is compatible with 0.5 – 6 pulse ignition signals (1-12 cylinder engines) with points electronic and most 12V high-performance racing ignitions.
  • Speedometer is compatible with most two wire sine wave and three wire hall effect vehicle speed sensors.

Specifications

Brand AutoMeter
Part Number 1720
Part Type Gauge Set
Bezel Color Chrome
Bezel Style Street Rod
Cross Sell 9117 5291 5292 5289 5290 2189
Cup/Hole Size – Metric – MM 85.7mm MM
Cup/Hole Size – Standard – IN 3-3/8" IN
Dial Color Black
Gauge Type 2 Piece Kit
Includes Adapter/Fitting 1/8" NPT Male to 1/8" compression fitting 1/8" NPT Female to 1/8" compression fitting 1/8" NPT to 1/4" NPT bushing 3/8" NPT and 1/2" NPT adapter fittings.
Includes Bulb & Socket 3212
Includes Light Covers Red 3214 & Green 3215
Includes Mounting Hardware Brackets Included
Includes Sensor Unit Fuel Sender 3262 – Oil Sender 2242 – Water Sender 2258 – VSS Sensor
Lens Style Domed Clear
Lighting Color White Incandescent
Lighting Type Incandescent
Movement Electric Air-Core
Outer Bezel Diameter 3-3/4" IN
Outer Bezel Diameter – Standard 3-3/8" IN
Pointer Color White
Range 8K RPM/120 MPH/100 PSI/100-250 °F/8-18V/240OE-33OF

Installation Instructions (PDF)

WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or reproductive harm. For more information go to www.P65Warnings.ca.gov

Additional information

Weight 4.85 lbs
Dimensions 8.75 × 17.75 × 4.5 in
Brand

AutoMeter

Part Type

Gauge Set

Manufacturer Part Number

1720

Country of Origin

US

Warranty

12 Months

Reviews

There are no reviews yet.

Be the first to review “AutoMeter 1720 Gauge Set – 3-3/8 QUAD SPEEDO”

Your email address will not be published. Required fields are marked *