AutoMeter 3276 FITTING, TEE, 1/4″ HOSE BARB TO 1/8″ NPT MALE, PLASTIC
$27.49FITTING TEE 1/4" HOSE BARB TO 1/8" NPT MALE PLASTIC
Showing 1–16 of 63 results
-
-
AutoMeter 3291 FITTING, TEE, 3/16″ HOSE BARB TO 1/8″ NPT MALE, PLASTIC
$25.92FITTING TEE 3/16" HOSE BARB TO 1/8" NPT MALE PLASTIC
-
AutoMeter 5244 Exhaust Gas Temperature (EGT) Sensor – COMP TC KIT 3/16
$259.34THERMOCOUPLE KIT TYPE K 3/16" DIA OPEN TIP 10FT INCL. STAINLESS COMP. & WELD BOSS
-
AutoMeter 5249 Exhaust Gas Temperature (EGT) Sensor – 1/4 TC SST SEN KIT
$134.02THERMOCOUPLE KIT TYPE K 1/4" DIA CLOSED TIP 10FT. INCL. MTG. HARDWARE
-
AutoMeter 5316 SENSOR, O2, REPLACEMENT, WIDEBAND AIR/FUEL, PRO PLUS
$272.37SENSOR O2 REPLACEMENT WIDEBAND AIR/FUEL PRO PLUS
-
Edelbrock 1205 Crankcase Ventilation Hose Connection Kit for #1207, #1221, #1223
$26.99Edelbrock part #1025 Crankcase Ventilation Hose Connection kit for #1207 #1221 #1223 and aluminum air cleaners #4207 #4221 #4266 and #41663.
-
Edelbrock 3898 EGR Plate Gasket OEM 4V
$25.99Edelbrock part #3898 is a Ford OEM 4V EGR plate gasket for 1979-87 460 engines with intake manifold #3766 installed.
-
Edelbrock 4201 Elite Breather – Side Mount
$47.99Edelbrock part #4201 Elite Series Breather is a side mount bolt on design. The lid is removable for oil fills and the lower housing contains a reticulated foam element to allow gases through while trapping oil.
-
Edelbrock 4204 Elite Push-in Breather Polished Die Cast AL. – Short
$37.99Edelbrock part #4204 Elite Series Short "Push-In" Breather is a die cast breather that will fit all existing Elite Series valve covers.
-
Edelbrock 4213 Push-in Round Billet Aluminum Breather – Polished
$49.99Edelbrock part #4213 Billet Polished Aluminum push in Breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert.
-
Edelbrock 42133 Push-in Round Billet Aluminum Breather – Black
$59.99Edelbrock part #42133 Billet Aluminum black powder coated push in breather fits all standard 1.25" valve cover holes. The top of the breather un-screws from the base for access to the foam insert.
-
Edelbrock 43510 Conical Valve Cover Breather with 9mm Inlet in Black Element
$21.99Edelbrock part #43510 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.
-
Edelbrock 43511 Conical Valve Cover Breather with 9mm Inlet in Red Element
$21.99Edelbrock part #43511 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.
-
Edelbrock 43513 Conical Valve Cover Breather with 9mm Inlet in Blue Element
$21.99Edelbrock part #43513 Pro-Flo Valve Cover Breather with 9mm Inlet is a small universal open element conical filter. It can be used as a valve cover breather for racing applications where the valve cover breathes out a 9mm diameter tube.
-
Edelbrock 4403 Black Signature Series Push-in Breather
$19.95Edelbrock part #4403 Valve Cover Breather is a traditional steel one-piece push in design. It is finished with a black mini texture powder coat to match our black valve covers.
-
Edelbrock 4405 Chrome Signature Series Push-in Breather
$19.99Edelbrock part #4405 Valve Cover Breather is a traditional steel one-piece push in design. The bright chrome finish matches our Signature Series valve covers.